
CANFEN HiSEC Super 6
Overview
The 2518mm panels are overlapped and clamped with a 40 x 5mm flat bar which is fixed with security through bolts, giving a maximum post centre of 2440mm. Fencing must be buried 300mm in ground or 100mm into a concrete cill. At 2.4m additional hostile security topping in the form of razor coil should be specified.
Finish
All Binns Canada posts/panels/gates and painted auxiliary components (for example, clamp-bars, slide bolts etc.) benefit from a protective zinc layer and electrostatically applied polyester powder coating to BS 1722-16. Care is taken with pre-treatment to ensure sound adhesion between the zinc and paint layers. In a UK CI environment, as defined in ISO 12944-2, this should ensure a useful life expectancy of the fence of at least 15-20 years. Life expectancy in all environments can be extended by maintaining the fencing with regular washing. Useful life will be reduced if the fencing is damaged. Any coating damage should be repaired to reduce the effect on useful life.
Enhanced painting systems such as marine coatings are also available for improved life expectancy in C2-C5M environments.
Sloping Ground
Panels can be stepped as required. Where gradients exceed 1:16, it is recommended that taller panels are either part-buried, cut on-site, or additional posts are used.
Product Data
- Heights: 2705, 3302m
- Nominal: 2.4, 3.0m
- Mesh Aperture: 76.2 x 12.7mm
- Wire Diameter: 1no. 6mm Vertical, 1no. 4mm Horizontal
- Panel Size: 2518mm
- Post Size: Min. 100 x 50mm
- Clamp Bar: 40 x 5mm
- Top Edge: Minimal Projections
- Post Centres: 2440mm
Request a Callback for This Product