CANFEN 868 A1 (SR1)

01Overview

Since it’s first introduction, CANFEN 868 A1 (SR1) has gone on to defend projects around the world as the leading ‘anti-cut’ twin wire and LPS 1175 A1 (SR1) fencing system. Manufactured in the West Midlands, it is constructed from twin 8mm horizontal wires eletro-welded to a vertical 6mm wire at 50 x 200mm mesh apertures.

With maximum post centres of 2525mm CANFEN 868 A1 (SR1) is the perfect perimeter fence for the majority of projects where a guaranteed minimum delay against forced entry is required. CANFEN 868 A1 (SR1) uses vandal-proof security fixings with a full length 80 x 5mm clamp bar and clip system.

02Finish

All Binns Canada posts/panels/gates and painted auxiliary components (for example, clamp-bars, slide bolts etc.) benefit from a protective zinc layer and electrostatically applied polyester powder coating to BS 1722-16. Care is taken with pre-treatment to ensure sound adhesion between the zinc and paint layers. In a UK C1 environment, as defined in ISO 12944-2, this should ensure a useful life expectancy of the fence of at least 15–20 years. Life expectancy in all environments can be extended by maintaining the fencing with regular washing. Useful life will be reduced if the fencing is damaged. Any coating damage should be repaired to reduce the effect on useful life.

Enhanced painting systems such as marine coatings are also available for improved life expectancy in C2–C5M environments.

03Sloping Ground

Panels can be stepped as required. Where gradients exceed 1:16, it is recommended that taller panels are either part-buried, cut on-site, or additional posts are used.

04Product Data